Syntermed Applications - Download Emory Cardiac Toolbox 3.01

This page provides the latest software release for the Emory Cardiac Toolbox (ECTb) 3.01. The steps required for downloading the software applications are as follows: Applications: Click on the following links to download the latest versions of the applications required to run the Emory Cardiac Toolbox 3.01. You should select the Save option for the downloads for these programs. Save the programs on your hard disk. The Toolbox install program is called NCTbSetup301.exe and the Master Control Program is called MCP_Release_v1.20.exe. Run both of these installers and select the defaults for all prompts. The Emory Cardiac Toolbox will automatically be loaded in the C:\C:\Program Files\Syntermed\ECToolbox folder. The Master Control files will be automatically loaded in the C:\Program Files\Syntermed\MCP folder. The Syntermed Icon will be loaded on your desktop when finished which is used to launch the applications. Check to make sure that MCP is pointing to the right location to launch the Toolbox. Do do this, from the MCP screen go to go to Edit/Options and make sure that the ECToolbox radial dial is selected and it should be pointing to the C:\Program Files\Syntermed\ECToolbox\lib\ECToolbox.exe application. If not then set it to point there by using the Browse button. Acceptance Testing: Prior to using clinically you should run the Toolbox on the example patients and fill out the Acceptance Test document which you can download with the link below. You can also download the Nuclear Report application (NRP) if you have ordered that program. This will be installed in the C:\C:\Program Files\Syntermed\ folder. Please contact us for a password to unzip the NRP application. The documentation link contains the Operator's manual for MCP and Toolbox 3.0 in pdf format. Download and save these files on your disk.

Downloads

Download and save these files on your disk.

Master Control Program

Emory Cardiac Toolbox 3.01

Toolbox Acceptance Testing Doc

Documentation

License

When you first run the MCP program you will be asked to contact Syntermed for the license file. Please call or send an email to info@syntermed.com with the number code generated by MCP for your computer and we will send you back the license file in an email.